Aluminum Sheet Board Folding Partition Wall

● Model Number :Type65/80/100 operable partition
● Matching Track: Type65/80/100 anodized aluminum track system
● Carrier bearing capacity: 225kg-1300kg
● Panel thickness:65/80/100mm
● Main structure:Anodized aluminum+aluminum Keel
● Sound insulation :STC32-53db
● Max panel height: 17000mm
● Base board:MDF,plywood;
● Rock wool: 55kg/m3
● Surface finish:acoustic fabric.
...

Send Inquiry

With NanaWall operable partitions you can choose from hundreds of configuration options. Shown below are some examples. The total number of panels in your wall opening depends on your design and the combination of panel height, width and glazing. With a limit of six hinged panels stacking to one side, a maximum width of about 36' is recommended for exterior applications and about 40' for interior applications. With top-hung systems - with additional unhinged paired panels - the maximum number of panels and width is virtually unlimited.


b_rolling-wall-chipboard-operable-wall-arcadia-componibili-gruppo-penta-13272-rel4d1491c2_


Egood operable wall partition is made of high quality anodized aluminum frame with environmental composite materials. The panels are hung by ceiling track only, no requirement of floor guides or rails. The panel has a standard thickness of 65-100mm and a width up to 1219mm.Maximum height can reach 17000mm tall.


827738651608574470_


Egood partition works with Architects,designer, project manager,contractor and owners of project ect. We dedicate to supply first class quality movable partition products for all of our clients, making their idea come true.



 


When sound from a loudspeaker collides with the walls of a room part of the sound's energy is reflected, part is transmitted, and part is absorbed into the walls. Just as the acoustic energy was transmitted through the air as pressure differentials (or deformations), the acoustic energy travels through the material which makes up the wall in the same manner. Deformation causes mechanical losses via conversion of part of the sound energy into heat, resulting in acoustic attenuation, mostly due to the wall's viscosity.



 Following acoustic test report for acoustic foldable partition, for Type 65 STC=45 in max, for Type 80, STC=48db in max, for Type 100, STC=53 db in max.



 

In general, soft, pliable, or porous materials (like cloths) serve as good acoustic insulators - absorbing most sound, whereas dense, hard, impenetrable materials (such as metals) reflect most.



1611371501



Related Products